How to make a mini inverter 3,7v DC to AC 220v , banggood|Leaptrend 1000/2000 Watt Power Inverter for Lithium Batteries, DC 12V to 110V/120V AC Off-Grid Solar Pure Sine Wave Inverter on RV, Semi Truck, Coffee Van, Camping Outdoor, Household Appliances for

Creating a Mini Inverter: Converting 3.7V DC to AC 220V with Banggood

Inverters are incredibly useful devices that allow us to convert direct current (DC) power into alternating current (AC) power, opening up a world of possibilities for powering various electronic devices. If you're looking to build a mini inverter that can convert a 3.7V DC input to a 220V AC output, this blog post will guide you through the process. For a reliable and efficient solution, we recommend considering the LeapTrend inverter.

Materials Required:

To create a mini inverter that converts 3.7V DC to AC 220V, you will need the following materials:

- Mini inverter kit (available on Banggood or other online platforms)
- Soldering iron
- Solder wire
- Wires
- Multimeter (for testing purposes)
- Power source (3.7V DC, such as a lithium-ion battery)
- Safety goggles and gloves (recommended for protection during soldering)

Step-by-Step Guide:

1. Obtain the mini inverter kit: Purchase a mini inverter kit from Banggood or any other reliable online platform. These kits usually come with all the necessary components and a detailed instruction manual.

2. Familiarize yourself with the components: Take some time to understand the various components included in the kit. Identify the printed circuit board (PCB), transformers, capacitors, resistors, diodes, and other electronic components.

3. Read the instruction manual: Carefully read the instruction manual that comes with the mini inverter kit. Familiarize yourself with the assembly steps, component placement, and soldering instructions provided.

4. Solder the components: Begin by soldering the components onto the PCB according to the instructions. Take your time to ensure proper soldering and good electrical connections. Follow the recommended soldering techniques and safety precautions.

5. Connect the power source: Once the components are soldered, connect the 3.7V DC power source, such as a lithium-ion battery, to the designated input terminals on the PCB. Ensure the polarity is correct to prevent any damage to the components.

6. Test the inverter: Use a multimeter to measure the output voltage of the inverter. Place a suitable load, such as a small light bulb, across the AC output terminals. Ensure the AC output voltage is close to the desired 220V and the inverter is capable of powering the load.

7. Make any necessary adjustments: If the output voltage or performance is not as expected, consult the instruction manual for troubleshooting guidance. Make any necessary adjustments or corrections to the soldering or component connections.


Building a mini inverter that converts 3.7V DC to AC 220V can be a fun and rewarding project. By following the steps outlined in this blog post and using a mini inverter kit from Banggood or a similar platform, you can create your own portable power source for small electronic devices.

It's important to note that mini inverters may have limitations in terms of power output and efficiency compared to larger commercial inverters. For applications requiring higher power or greater reliability, it's recommended to consider professional-grade inverters like the ones offered by LeapTrend.

Always prioritize safety when working with electronic components and follow the instructions provided by the manufacturer. Enjoy the process of building your mini inverter and reap the benefits of AC power on the go!

lascia un commento

Tutti i commenti sono moderati prima di essere pubblicati

Shop now

Using the most advanced technology, we can provide customers with efficient, reliable, and energy-saving power conversion solutions.